,

WGSW-24040

תיאור מוצר
L2+ 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP Combo Managed Switch

Physical Port
  • 24-port 10/100/1000BASE-T RJ45 copper
  • 4 100/1000BASE-X mini-GBIC/SFP slots , shared with port-21 to port-24
  • RS-232 DB9 console interface for basic management and setup
Layer 2 Features
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm control support
  • - Broadcast / Multicast / Unicast / Unknown-unicast
  • Supports VLAN
  • - IEEE 802.1Q tagged VLAN
  • - Up to 255 VLANs groups, out of 4095 VLAN IDs
  • - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
  • - Private VLAN Edge (PVE)
  • - Protocol-based VLAN
  • - MAC-based VLAN
  • - IP Subnet-based VLAN
  • - Voice VLAN
  • - Management VLAN
  • Supports Spanning Tree Protocol
  • - STP, IEEE 802.1D Spanning Tree Protocol
  • - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • - MSTP, IEEE 802.1s Multiple Spanning Tree Protocol (by VLAN)
  • - TP BPDU Guard and BPDU filtering
  • Supports Link Aggregation
  • - IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  • - Cisco ether-channel (Static Trunk)
  • - Maximum 12 trunk groups, up to 8 ports per trunk group
  • - Up to 16Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Layer 3 IP Routing Features
  • Supports maximum 32 software static routes and route summarization
Quality of Service
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
  • - IEEE 802.1p CoS
  • - TOS / DSCP / IP Precedence of IPv4/IPv6 packets
  • - IP TCP/UDP port number
  • - Typical network application
  • - Strict priority and Weighted Round Robin (WRR) CoS policies
  • - Traffic-policing policies on the switch port
  • - DSCP remarking
Multicast
  • Supports IGMP snooping v1, v2 and v3 for IPv4 multicasting network
  • Supports MLD snooping v1 and v2 for IPv6 multicasting network
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • MVR (Multicast VLAN Registration)
Security
  • Authentication
  • − IEEE 802.1x port-based / MAC-based network access authentication
  • - Built-in RADIUS client to co-operate with the RADIUS servers
  • - TACACS+ login users access authentication
  • - RADIUS / TACACS+ users access authentication
  • Access Control List
  • - IPv4 / IPv6 IP-based ACL
  • - MAC-based ACL
  • Source MAC / IP address binding
  • Port Security for Source MAC address entries filtering
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • Auto DoS rule to defend DoS attack
  • IP address access management to prevent unauthorized intruder
Management
  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
  • - Console / Telnet command line Interface
  • - Web switch management
  • - SNMP v1, v2c, and v3 switch management
  • - SSH / SSL secure access
  • User Privilege levels control
  • System Maintenance
  • - Firmware upload/download via HTTP / TFTP
  • - Configuration upload / download through web interface
  • - Dual Images
  • - Reset button for system reboot or reset to factory default
  • - Built-in Trivial File Transfer Protocol (TFTP) client
  • Four RMON groups (history, statistics, alarms, and events)
  • IPv6 IP Address / NTP / DNS management and ICMPv6
  • BOOTP and DHCP for IP address assignment
  • DHCP Relay and DHCP Option82
  • NTP (Network Time Protocol)
  • Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
  • PLANET smart discovery utility for deploy management
  • Redundant Power System (WGSW-24040R)
  • 100~240V AC / 48V DC dual power redundancy
  • Active-active redundant power failure protection
  • Backup of catastrophic power failure on one supply
  • Fault tolerance and resilience

Specification