,

IGT-1205AT

תיאור מוצר
GT-1205AT Industrial 10/100/1000T to 2-port 100/1000X SFP Media Converter

Physical Port
  • 1-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
  • 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured
  • Fiber Port Redundancy
  • Link status auto-detect and redundant on dual ports with the same connector type
  • Only Primary-Port is active at a time, the Backup-Port is blocked
  • When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically
  • Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port
Layer 2 Features
  • Supports auto negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • 9K Jumbo Frame Size support
  • Integrated address look-up engine, support 1K absolute MAC addresses
  • Automatic address learning and address aging
Industrial Case / Installation
  • Slim IP30 metal case protection
  • DIN rail and wall mount design
  • Redundant Power Design
  • - 12 to 48V DC, redundant power with polarity reverse protect function
  • - AC 24V power adapter acceptable
  • Supports EFT protection 6000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature


Specification